 |
 | | | |
|
 | | Biolase FCE liquid | | Ceraperm SFC liquid |
|
- Removes fuzziness on the surface of the fabric during production.
- Improves significantly the soft feel of garment.
- Rapid kinetic behavior reduces time of the biowash. Therefore energy consumption costs are saved and productivity is increased.
- Less colour fading after multiple laundering.
| |
- Very soft and pleasant handle.
- Virtually no negative influence on water – and oil repellency.
- Good sewability properties in combination with fluorocarbons on knitwear.
- Main use on cotton and cotton blends.
- Also recommended together with products like Nuva 4200 liq (Soil Release and Soil Repellant) and also products like Nuva SRCN (Soil Release).
|
| Printofix Thickener ECS liq | | Foron Scarlet S-WF |
|
- Concentrated thickener: less dosage.
- Exhibits good stability to electrolytes.
- Is easy to handle.
- Provides prints with high colour yield, good fastness level.
- Especially to print well defined patterns.
- Does not impair the handle.
| |
- High wet fastness. Low staining on multifibre even on post heat set fabric.
- Can be applied in exhaust, printing & continuous application.
- Main element for wet fast fire shade in combination with Foron Brilliant Yellow S-WF, Foron Golden Yellow S-WF, and Foron Red S-WF.
- High Sublimation Fastness even at 210°C.
- Good dispersing and leveling properties.
|
| Printofix Red T-B | | Printofix Yellow T-C |
|
- Highly concentrated Pigment.
- Good dispersion stability even below 0°C.
- Very little influence on viscosity of synthetic thickener.
- High dry cleaning fastness.
- Thermal stability.
- Suitable for discharge printing.
- Suitable for all types of printing application i.e., aqueous, semi-aqueous and solvent base
- Does not contribute in gelling of printing paste.
| |
- Bright Lemon Yellow Shade.
- High Pigment Concentration.
- Very little influence on viscosity of synthetic thickener.
- High dry cleaning fastness.
- High Thermal stability.
- Suitable for discharge printing.
- Suitable for all types of printing application i.e., aqueous, semi-aqueous and solvent base.
- Does not contribute in gelling of printing paste.
|
| | Foron® Scarlet S-WF | | Foron® Violet S-WF |
| |
- High wet fastness. Low staining on multifiber even on post heat set fabric.
- Can be applied in exhaust, printing and continuous application.
- Main element for wet fast fi re shade in combination with Foron Brilliant Yellow S-WF, Foron Golden Yellow S-WF, and Foron Red S-WF.
- High sublimation fastness even at 210°C.
- Good dispersing and leveling properties.
| |
- High wet fastness. Low staining on multifi ber even on post heat set fabric.
- Can be applied in exhaust, printing and continuous application.
- Main element for wet fast violet and purple shade in combination with Foron Blue S-WF and Foron Rubine S-WF.
- High sublimation fastness even at 210°C.
- Good dispersing and leveling properties.
|
| | Foron® Black AS-3LF | | Foron® Dark Blue S-WF |
| |
- High light-fast and hot-light-fast black disperse dyestuff.
- High strength (30% stronger than Foron Black AS-LF) and build-up.
- Neutral shade under different light sources (D65/TL84/A).
- Low colour fading post exposure.
- Suitable for all commonly required automotive light-fastness standards.
- Excellent sublimation fastness upto 180°C/30sec.
- Very good combinability with UVabsorbers (Fadex®).
- Suitable as base element for Coldblack® applications.
| |
- High wet-fast dark blue disperse dyestuff.
- Excellent build-up.
- Neutral (greenish) shade .
- No reddish fl are under artifi cial light sources (TL84/CWF).
- Excellent cotton reserve.
- Good clearability above pH 9.
- Leading sublimation fastness upto 210°C/30sec., (rating 4.9 GS).
|
| | Eganal® PLM liquid | | Arkofix® ELF liq conc |
| |
- Improves dispersion stability of the dyes in the bath.
- Ensures good penetration and increased colour yield.
- Improves coverage of materials with different affinity.
- Allows to reduce the dyeing time and/or the dyeing temperature.
- Improves the reservation of the cellulosic part by dyeing polyester/cellulose blends.
- Improves the in-out levelness in package dyeing mac hines.
- Is suitable for levelling and partial stripping of faulty dyeings.
- Does not affect the wet fastnesses and has no or minimal effect on the usual light fastness.
- Does not develop an unpleasant odor during dyeing or drying.
- Is non foaming.
| |
- Has a free formaldehyde content below 0.1 %.
- Produces particularly low formaldehyde finishing effects. Meets the requirements of consumer labels such as Eco-Tex Standard 100 for textiles worn next to the skin (<75 ppm formaldehyde on the goods). This applies particularly to the assessment methods as described in Japan Law 112-1973.
- Imparts excellent crease and shrinkresistant properties to textiles of cellulosic fi bers and their blends.
- Gives excellent strength retention and therefore is recommended for application to knitwear and lighter
- cotton articles.
- On 100% cotton the fi nishing effects are not stable to chlorine.
|
| | Nuva® 1910 liq | | Solusoft® FE liquid |
| |
- Fluorocarbon technology with a polyamide based cationic copolymer.
- This copolymer improves signifi cantly the effi ciency of fl uorocarbons.
- Economical product to achieve high water and oil repellency.
- Provides excellent initial repellencies as well as good durability.
- Excellent product to be incorporated into a resin fi nishing bath.
- Shows high compatibility with fi nishing chemicals and fi re retardants.
- Provides a relatively soft handle.
- Mainly recommended for cellulose based fi bers.
- Cationic.
| |
- Supplies specifi c “glacier” handfeel.
- Elegant surface smoothness.
- Improves rubbing fastness (dry and wet) of pigment printed fabrics.
- Best silicone softener to improve sewing properties.
- Nonionic character, thus no yellowing on white.
- No infl uence on thermomigration.
- Improves elasticity and resilience of knitwear.
- Highly wash stable.
- Improves technological properties
- in resin fi nish such as tear strength, abrasion.
- Improves crease recovery angles and DP-rate in resin fi nish.
- Recommended to use in acidic conditions ( pH <6).
|
| | Foron Violet S-WF | | Diresul Antioxidant PRM liq |
| |
- High wet fastness. Low staining on multifibre even on post heat set fabric.
- Can be applied in exhaust, printing and continuous application.
- Main element for wet fast violet and purple shade in combination with Foron Blue S-WF and Foron Rubine S-WF.
- High Sublimation Fastness even at 210°C.
- Good dispersing and leveling properties.
| |
- Prevents premature oxidation during Sulphur dyeing.
- Promotes better dissolution of Sulphur dyes when pasted with them.
- Promotes better penetration and leveling effect in the dyebath.
|
| | | | |
| | | | |
| | | | |
| | | | |
|
| | | | |